Unlocking The Cabinet Electronic Clasp Lock When A Fire Alarm Is Generated; Optional) Neteco Management - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
5.3.12.2 Unlocking the Cabinet Electronic Clasp Lock When a Fire Alarm Is
Generated
Context
In this example, the fire extinguishing system connects to port AI/DI_3. The actual
port prevails.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose System Settings > Linkage Control.
Step 3 Ensure that Enable linkage control function is Yes.
Step 4 On the Linkage Group tab page, set Link fire control with clasp lock open to
on.
Select Link fire control with clasp lock open under Linkage Group. If its value is on, the
corresponding logic configurations under Linkage Logic List are available. If its value is off, the
corresponding logic configurations under Linkage Logic List are unavailable.
Step 5 Modify the AI/DI_3 signal name.
1.
2.
3.
4.
Step 6 Enable the AI/DI device.
1.
2.
3.
4.
5.
----End
Follow-up Procedure
After the fire alarm is cleared, you need to manually close the cabinet door. After
the door is closed, the door open alarm is cleared.

5.3.13 (Optional) NetEco Management

Issue 02 (2020-12-25)
NO TE
Log in to the ECC800-Pro WebUI as an administrator.
Choose System Settings > Signal Name Modify. The Batch Signal
Configuration tab page is displayed.
Set Device type to ECC800, set Device name to ECC800, and click OK.
On the query result tab page, set the new signal name of AI/DI_3 to Fire and
click Submit.
Choose Monitoring > System > ECC800 > Running Parameters > AI/DI_3
Port Settings.
Set Fire sensor to Enable. Click Submit to access the AI/DI_3 setting page.
Select Fire sensor type and set it to Normal Open or Normal Close as
required.
Click Unhide All Advanced Signals, and click Power Supply Parameters.
Ensure that II power supply enable(AIDI_3/COM2/AIDI_5) is Enable.
Click Submit.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
215