Connecting Cabinet T/H Sensor Cables - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Figure 4-114 Connecting cabinet electronic clasp lock cables
----End

4.3.4.2 Connecting Cabinet T/H Sensor Cables

Prerequisites
The required cables have been prepared.
Procedure
Step 1 Connect the OUT port on the T/H sensor on the front door to the RS485_IN port
on the T/H sensor on the rear door in series.
Issue 02 (2020-12-25) Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
146