Huawei FusionModule500 User Manual page 242

FusionModule500 Smart Mini Data Center
User Manual
Procedure
Step 1 On the CloudOpera NetEco app, tap
Step 2 On the Create network screen, enter network information as prompted and tap
Confirm.
Figure 5-58 Creating a network
Table 5-27 Parameter description
Parameter
Network Name
ESN
Longitude
Latitude
Customer Information
Issue 02 (2020-12-25)
Description
Name of the network.
ESN of the ECC controller.
NOTE
Tap
obtain the ESN.
Longitude of the network. You can manually enter the
value or use GPS to locate.
Latitude of the network. You can manually enter the
value or use GPS to locate.
Customer information.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
in the upper right corner.
to scan the QR code on the ECC controller to
232