Personnel Requirements; Hardware Installation; Cabinet Transportation And Unpacking - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
No.
(8)
(9)

4.1.5 Personnel Requirements

Only trained and qualified personnel who fully understand basic safety
precautions are allowed to install and operate a modular data center.
Huawei will not be liable for any consequence caused by the violation of this
document.
The requirements are as follows:
●
●

4.2 Hardware Installation

The angle of door opening by the gas spring is 110°. Ensure that the door opening
angle is less than 110°.

4.2.1 Cabinet Transportation and Unpacking

Context
●
●
●
Issue 02 (2020-12-25)
Component
Smoke detector
3.5 kW split-type
air conditioner
NO TE
If the VCN or IVS1800, server, and LAN switch are configured, determine their installation
positions based on the site requirements.
CA UTION
Customers' installation personnel must be trained by Huawei and understand
how to install and operate a modular data center.
The number of installation personnel varies based on the project progress and
installation environment. Typically, two to three persons are required.
Only trained personnel are allowed to move the cabinet. Remove the packed
cabinet from the pallet using a pallet truck and move the cabinet to the
installation position.
To prevent the cabinet from falling over, secure it to the pallet truck using
ropes before moving it.
To prevent shocks or falls, move the cabinet gently. After placing the cabinet
in the installation position, unpack it and take care to prevent scratches. Keep
the cabinet steady during unpacking.
Copyright © Huawei Technologies Co., Ltd.
Onsite Installation
Not required
Required
4 Installation Guide
Onsite Cable
Connection
Not required
Required
63