Configuring Event Notification - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
If the door still cannot be opened or closed properly, check the following items:
● Whether cables are connected correctly
● Whether the DIP switch setting is correct
----End

5.3.10 Configuring Event Notification

You can set alarm notification by email or SMS as required. Information about a
maximum of 20 users who will receive alarm notification can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:
●
Issue 02 (2020-12-25)
Figure 5-12 Removing the fastener
NO TICE
The ECC800-Pro is configured with a 4G module and supports 2G/3G/4G SIM
card access.
NO TE
1. The ECC800-Pro supports only SMS notification service but not data service by
using the 4G module.
2. China: 2G and 4G networks support China Unicom or China Mobile SIM cards, and
3G networks support only China Unicom SIM cards.
3. Outside China: Select SIM cards according to the following wireless modes and
frequency bands:
● 4G: wireless mode (FDD-LTE and TDD-LTE), coverage frequency band (B1, B3,
B5, B7, B8, and B20)
● 3G: wireless mode (WCDMA), coverage frequency bands (B38, B40, and B41)
● 2G: wireless mode (GSM), coverage frequency band (900/1800 MHz)
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
180