Connecting Cables - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
2.
Figure 4-34 Drainpipe routed from the bottom
After routing a water pipe, secure it to the pipe assembly using cable ties, and seal
the cable hole using firestop putty.
----End
Follow-up Procedure
Step 1 After connecting the drainpipe, power on the smart cooling product, add water to
the water pan until the low float switch is raised, and check whether drainage is
normal.
Step 2 Ensure that the condensate pipe is not bent during installation and connection.
----End

4.2.4.10 Connecting Cables

The indoor unit uses the single-phase power supply from the smart cooling
product control unit. The outdoor unit is energized by the power distribution unit
in the cabinet.
Issue 02 (2020-12-25)
Install the drainpipe.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
93