Replacing A T/H Sensor (33010516) - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
4.
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
Follow-up Procedure
If the hard disk works abnormally, contact Huawei technical support.

6.4.3.9 Replacing a T/H Sensor (33010516)

Prerequisites
●
●
Procedure
Step 1 Tap Shutdown on the controller home screen.
Exercise caution because the device is still energized after it is shut down on the
controller home screen.
Issue 02 (2020-12-25)
Figure 6-23 Connecting data and power cables to hard disks
Close the chassis cover, and use a PH2 screwdriver to fasten the rear screws.
Figure 6-24 Closing the chassis cover
A T/H sensor needs to be replaced.
A spare T/H sensor of the same model is available and functional.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 O&M
283