Huawei FusionModule500 User Manual page 216

FusionModule500 Smart Mini Data Center
User Manual
Step 3 Configure disk initialization.
1.
2.
3.
Step 4 Modify the IP address for the IVS1800.
1.
2.
Issue 02 (2020-12-25)
NO TE
Recording data can be stored only after you install and initialize the disks.
Choose Local Configuration > Local Disk.
In the upper right corner of the RAID Groups area, click Initial Disk
Configure disk initialization.
Figure 5-40 Disk initialization (RAID 5 economical configuration by default)
Choose Local Configuration > Server configuration. Set the service IP
address (internal IP address of the IVS1800), time zone, and time according to
the site requirements.
Figure 5-41 Configuring the server (Single Mode by default)
NO TE
Set Business IP to XXX.XXX.XXX.XXX, Subnet mask to 255.255.255.0, and Gateway IP
to XXX.XXX.XXX.XXX. The values here are examples. The actual value prevails.
Change the PC IP address to an address in the network segment of the new
IVS1800 IP address, enter the IVS1800 IP address in the address box of the
Internet browser, and log in to the OMU portal system.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
206