Huawei FusionModule500 User Manual page 145

FusionModule500 Smart Mini Data Center
User Manual
2.
3.
4.
Issue 02 (2020-12-25)
After binding cables, cut off the excess parts of cable ties and trim away any
burrs, as shown in Figure
Figure 4-99 Cutting off the excess part of a cable tie
Do not use cable ties at a place where the cables are bent. Otherwise, the
cable cores may break due to strong stress, as shown in
Figure 4-100 Binding cables in a bending area
Ensure that the cable ties are wrapped and secured in the same direction and
do not generate interference with subsequent operations, as shown in
4-101.
Figure 4-101 Direction for securing cable ties
Copyright © Huawei Technologies Co., Ltd.
4-99.
4 Installation Guide
Figure 4-100.
Figure
135