Connecting Vcn Cables - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Figure 4-115 T/H sensor cable route
----End

4.3.4.3 Connecting VCN Cables

Prerequisites
Cables have been prepared.
Procedure
Step 1 Connect one end of the ground cable to the ground terminal on the device and
the other end to the ground point on the cabinet. A Phillips screwdriver and M4
screws are required. The ground cable is a yellow-and-green cable of 16–18 AWG.
The customer needs to prepare the ground cable.
Issue 02 (2020-12-25)
NO TE
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
147