Replacing A Pdu2000 - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Procedure
Step 1 Open the front or rear door of the cabinet.
Step 2 Remove the nuts from the gas spring using an adjustable wrench.
Step 3 Remove the gas springs.
Figure 6-2 Removing a gas spring
Step 4 Tighten the new air spring using an adjustable wrench.
----End

6.4.1.3 Replacing a PDU2000

Prerequisites
●
●
Context
A PDU2000 is installed at the rear door of a cabinet.
Procedure
Step 1 Open the rear door of the cabinet.
Issue 02 (2020-12-25)
Tools: Phillips screwdriver, step ladder
Material: A spare PDU2000 of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
6 O&M
266