Adding A Smart Module - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
3.
4.
Step 3 Click
----End

5.3.13.1.9 Adding a Smart Module

This section describes how to create a smart module in the root node, subnet,
equipment room, container, or site management domain.
Prerequisites
●
●
Procedure
Step 1 Choose System > Configuration > Data Center Planning from the main menu.
The Data Center Planning page is displayed.
Step 2 Choose the management domain where you want to add a smart module from
the navigation tree on the left.
Step 3 Click Domain. The infrastructure area is displayed.
Step 4 Select Modular from the Type drop-down list.
Figure 5-52 Selecting Modular
Issue 02 (2020-12-25)
NO TE
You can adjust the shape of Room, Building–ShapeNode, Floor–ShapeNode,
Container–ShapeNode, and NetecoSite. Holding down the Shift key and the left
mouse button and then clicking on the corresponding lines can increase the small
yellow dot. You can drag the small yellow dot to adjust the shape of the managed
domain icon.
To delete a domain, click the domain icon and select Delete under
In the right side of the view area, set Management Info. Configure parameters
as required. The parameters marked with asterisks (*) are mandatory.
NO TE
You can configure Management Info, Electricity Info, and Refrigeration Info for the
equipment room management domain.
Click on the toolbar.
Repeat steps Step 2.1
on the toolbar.
You have logged in to the NetEco client using a web browser.
You have created management domains in Data Center Planning. For
detailed operations, see
Copyright © Huawei Technologies Co., Ltd.
to Step 2.4 until the configuration is complete.
Creating a Domain .
5 Power-On Commissioning
.
222