Optional) Installing An Ivs1800 - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Phillips screwdriver to fix the M6 screws on the mounting ears. Each mounting ear
uses two M6 screws.
Figure 4-81 Installing the device
----End

4.2.6.11 (Optional) Installing an IVS1800

Context
By default, the IVS1800 is delivered without disks. After the IVS1800 is delivered to
the site, install hard disks as required and then install the IVS1800 in the cabinet.
Procedure
Step 1 Install hard disks.
1.
2.
Issue 02 (2020-12-25)
Use a PH2 screwdriver to remove the two black screws on the rear of the
chassis cover, and take off the chassis cover.
Figure 4-82 Removing the chassis cover
Remove two black screws on each side of the chassis and the silvery white
one on top of the hard disk tray, raise the hard disk tray by 45 degrees, and
take out the upper and then lower layers of hard disk tray.
Figure 4-83 Removing the hard disk tray
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
126