Setting Parameters On The Iclient - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Step 5 Enable camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled,
cameras will automatically time-synchronize from their access servers.
1.
2.
3.
4.
5.
Step 6 Create a user.
When connecting to the IVS1800 on the NetEco, you need to log in to the VCN as
a non-admin user.
1.
2.
3.
4.
----End

5.3.11.5.2 Setting Parameters on the iClient

Prerequisites
The network communication between the IVS1800 and the camera is normal.
Issue 02 (2020-12-25)
Log in to the OMU portal as the admin user.
Choose Maintenance > Unified Configuration.
Set Module Name to SCU and Parameter type to System property, and
click Search.
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
Figure 5-44 Configuring camera NTP synchronization
Log in to the OMU portal as the admin user.
Choose User Management > Add User.
NO TE
When creating a user, you can select Enable account validity period and set Valid from
and Valid to to set the account validity period for the created user.
Set Multi-point logins to a value greater than 2.
On the User List page, click Permission Settings next to the new user, select
the cameras to be browsed and queried, obtain the documents delivered with
the device or by referring to the "Reference Documentation" section, set other
parameters, and click Save.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
208