Installing T/H Sensors - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Table 4-12 DIP switch settings on T/H sensors
Address
1
2
The default address of T/H sensors purchased from Huawei is 1.
----End

4.2.6.4 Installing T/H Sensors

Procedure
Step 1 Install T/H sensors.
1.
2.
Step 2 Set the DIP switch address of the T/H sensor on the front door to 2 and that of
the T/H sensor on the rear door to 1.
Table 4-13 DIP switch setting on a T/H sensor
Address
1
2
The default address of T/H sensors purchased from Huawei is 1.
----End
Issue 02 (2020-12-25)
DIP Switch Sequence No.
1
ON
OFF
NO TICE
Open the front and rear doors of the cabinet.
Unpack the two T/H sensors and attach one sensor to the mounting bars at
the 40th U position on the front door and the other to the 34th U position on
the rear door of the cabinet.
NO TE
The installation positions of the T/H sensors can be adjusted as required.
DIP Switch Sequence No.
1
ON
OFF
NO TICE
Copyright © Huawei Technologies Co., Ltd.
2 3
OFF OFF
ON OFF
2 3
OFF OFF
ON OFF
4 Installation Guide
4 5
OFF OFF
OFF OFF
4 5
OFF OFF
OFF OFF
6
OFF
OFF
6
OFF
OFF
109