Loop I/O Module Lp01/Lp03 - Toshiba V Series User Manual

1.6 Names and Roles of Products
1.6.5

Loop I/O module LP01/LP03

1
The loop I/O module LP01/LP03 is used in combination with the CPU module L1PU12H
(or L1PU11H). It has a process I/O processing function and a RAS function which are
required for loop control. PID control processing is performed by the CPU module
L1PU12H (or L1PU11H). The process data are sent and received through an IO bus,
which is a local transmission bus.
The number of I/O points is: 4 points for AI;1 point for MV; 2 points for AO; 3 points for DI;
3 points for DO. The MV output is a current output of 4 to 20 mA.
The loop I/O module is available in two types depending on IO bus transmission speed:
LP01 (high-speed type), LP03 (low-speed type)
Figure 1-16 Appearance of LP01 Module
27
6F8C1005