Table of Contents
Advertisement
CARESCAPE Monitor B850
2.
Select Configuration > Certificate management > Import Key or Signed Certificate.
3.
To upload the certificate file:
a.
b.
c.
d.
4.
To upload the key file:
a.
b.
c.
d.
7.19.4 Managing the current certificate or private key
1.
Log in to Webmin.
2.
Select Configuration > Certificate management > Manage/view installed certificates
and keys.
3.
Select the certificate or key file in the drop-down list and select View.
•
•
7.19.5 Managing the Webmin certificate or key
1.
Log in to Webmin.
2.
Select Configuration > Certificate management > Webmin Certificate.
3.
In the drop-down list, select the certificate file and Select. The certificate file must also
contain the unencrypted key.
•
•
The change will take effect immediately.
NOTE: The service interface can become unresponsive after a new certificate is uploaded.
If necessary, reload the page or reopen the browser after uploading the certificate.
7.20 Software management
Software installation consists of two main steps: software transfer and software activation.
7.20.1 Transferring the software
To begin the software installation, transfer the new software into the inactive memory partition
of the patient monitor. You can use either of the following tools:
96
2106778-001
In the Certificate file to upload field, select Choose file, search the drive and folder
where the file is located, and select the file you wish to upload. Follow the
instructions of the web browser.
In the Destination directory of certificate field, select the destination directory for
uploading the certificate file.
Enter the name of the certificate to the Destination filename of certificate field.
Select Upload Certificate to upload the certificate file to the host device.
In the Key file to upload field, select Choose file. Search for the drive and folder
where the file is located and select the file you wish to upload. Follow the
instructions of the web browser.
In the Destination directory of key field, select the destination directory for
uploading the private key file.
In the Destination filename of certificate field, enter the name of the private key.
Select Upload Key to upload the private key file to the host device.
To download the certificate or key file, select Download. NOTE: The download
certificate or key file is not encrypted. To encrypt the file, enter a password in the
field below the certificate/key table and select Download As PKCS12, With
Password. This password is user-selectable.
To delete the certificate or key file, select Delete.
To enable the selected certificate or key file, select Set.
To reset the selected certificate or key file, select Reset.
Advertisement
Table of Contents
Troubleshooting
