Remote Access To Webmin Using A Service Pc Over The Ix Network - GE CARESCAPE B850 Service Manual

NOTE: For more information on how to configure the IP address, refer to the PC's
documentation.
5. Launch a web browser on the service PC.
6. In the Address field, type https://[IX IP address]:10000 and press Enter.
NOTE: [IX IP address] is the IX Network IP address of the patient monitor.
The Login to Webmin dialog box displays.
7. Continue to
Closing Webmin
1. Restore the patient monitor's original IX Network configuration and service PC's network
settings if they were changed.
2. Disconnect the crossover cable from the patient monitor and from the service PC.
3. Reconnect the patient monitor back to the IX Network if applicable.
4.3 Remote access to Webmin using a service PC over the
IX Network
1. Connect a service PC to the IX Network using a standard network cable.
2. In patient monitor, select Monitor Setup > Service. The local browser opens and displays
the Login to Webmin dialog box.
3. Record the IX IP address of the patient monitor:
IX IP address: ______________________
4.4. Login to Webmin.
Using Webmin service interface
2106778-001
41