Call Transfer-All Calls-Ccis - NEC UNIVERGE SV9300 Networking Manual

CALL TRANSFER-ALL CALLS-CCIS

General Description
This feature allows a station user to transfer incoming or outgoing Central Office, intra-office and inter-
office calls to another station in the CCIS network, without Attendant assistance.
Programming
START
CM12 Assign Service Restriction Class A to the
required stations.
CM15 Allow Trunk-to-Trunk Transfer in Service
Restriction Class A assigned by CM12 Y=02.
CM12 Assign Service Restriction Class C to the
required stations.
CM15 Allow switch hook flash capability during
C.O. line connection in Service Restriction
Class C assigned by CM12 Y=07.
CM36 Specify the combination of Trunk Routes
allowing a Trunk-to-Trunk (CCIS) Connec-
tion.
NOTE:
A
DESCRIPTION
When using Line Reconnect-CCIS,
allow the Trunk-to-Trunk (CCIS)
connection between same routes.
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=022
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 1 : Allow
• Y=07
(1) X-XXXXXXXX: Station No.
(2) XX: 00-15 : Service Restriction Class C
• Y=090, 091
(1) 00-15: Service Restriction Class C
assigned by CM12 Y=07
(2) 1 : Allow
• Y=0
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
(2) 0 : Allow
1 : Restricted
1-109
Chapter 1 CCIS FEATURES
CALL TRANSFER-ALL CALLS-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm