Connected Destination Indication / Calling Party Information Indication Assignment - NEC UNIVERGE SV9300 Networking Manual

CONNECTED DESTINATION INDICATION / CALLING PARTY INFORMATION INDICATION ASSIGNMENT

CONNECTED DESTINATION INDICATION /
CALLING PARTY INFORMATION INDICATION ASSIGN-
MENT
(1) To indicate the answering station number to the calling party or to indicate the calling party number
to the called party, do the following programming.
If you do not need any indications, restrict them by CM15 Y=151.
START
CM12 Assign Service Restriction Class A and Ser-
vice Restriction Class B to the required sta-
tions.
CM15 Allow or Restrict Connected Destination
Number Indication/Calling Party Number In-
dication in Service Restriction Class B as-
signed by CM12 Y=02.
Allow Calling Number Display for incoming
calls in Service Restriction Class A assigned
by CM12 Y=02.
CM12 Assign an ISDN Subscriber number and ISDN
Local Office Code Table number to required
stations.
A
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
ZZ : 00-15 : Service Restriction Class B
• Y=151
(1) 00-15: Service Restriction Class B
assigned by CM12 Y=02
(2) 0 : Restricted
1 : Allow
• Y=136
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 0: Calling Number Display
• Y=12
(1) X-XXXXXXXX: Station No.
(2) X-XXXX: ISDN Subscriber No.
• Y=13
(1) X-XXXXXXXX: Station No.
(2) 00-14: ISDN Local Office Code Table No.
00-14
2-19
Chapter 2 Q-SIG FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch2001.fm