Calling Name Display-Ccis - NEC UNIVERGE SV9300 Networking Manual

CALLING NAME DISPLAY-CCIS

General Description
This feature permits the station name of a calling or called party at another switching office, through the
CCIS network, to be displayed either on a Multiline Terminal or an Attendant Console.
Programming
START
CM08 Specify the number of digits sent to the CCIS
network to 24 digits.
Specify the time to go back to date and time
display after the call is answered.
Specify the duration to display the name.
Specify the duration of displaying the caller in-
formation when the incoming/outgoing call is
answered by the destination via CCIS.
CM20 Assign the access code for station user name
entry from an individual station.
CM35 Assign a trunk name number to each trunk
route.
CMA7 Provide each CCH number with Name Display
feature.
A
DESCRIPTION
(1) 379
(2) 1 : 24 digits
(1) 120
(2) 0 : 10 seconds later
1 : 6 seconds later
(1) 121
(2) 0 : Until call finished
1 : As per CM08>120
(1) 580
(2) 0 : 6 seconds
1 : Until call is finished
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code (0-9, *, #)
(2) A110: Name Display
• Y=003
(1) 00-63: Trunk Route No.
(2) 00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=000 are displayed
16-63: Trunk Name No.
• Y=26 Name Display
(1) 00-63: CCH No.
(2) 1 : To provide
1-113
Chapter 1 CCIS FEATURES
CALLING NAME DISPLAY-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm