Network Name Display (Ni-2 Pri) - NEC NEAX 2400 IPX Programming Manual

NETWORK NAME DISPLAY (NI-2 PRI)

N-47 NETWORK NAME DISPLAY (NI-2 PRI)
1. General Description
This feature provides the Name Display service between NEAX2400 IPX system and National-ISDN 2 network
(NI-2 network or NI-2).
Name Display service supports the followings.
Note:
(a) When the call is terminated directly from NI-2 network, it displays the received Calling Name
information on the D
(b) When the call from NI-2 network is terminated via tandem connection, it transmits the received
Calling Name information through an intermediate network and displays the information on the
destination D
This service is realized in the following case or network. See the illustration below.
Calling Name information received from NI-2 network is displayed on the D
connected directly or the system connected via tandem connection.
Office A
CCIS / Q-SIG
NEC
2. Operating Procedure
No manual operation is required.
CHAPTER 6
Page 178
Revision 1.0
term
/PS.
term
/PS.
Office B
FCCS
NEC
PS A
NDA-24305
term
Office C
to NI-2 network
NEC
term
D A
ZT A
CCIS /
Q-sig
NEC
Office D
or PS terminal in the system
National-
ISDN 2
term
D B
ZT B
PS B