NEC NEAX 2400 IPX Programming Manual page 277

2. Operating Procedure
[Set the service]
The SS-CF service setting should not be duplicated. The following operations (either by the access code or by
the function/soft key) should be performed for each service.
The CF-B and CF-NR can be set/cancelled at one time depending on the system data.
Note:
• Using the access code
(1) Lift the handset; the dial tone is heard.
(2) Dial each access code for setting the corresponding Call Forwarding service; the special dial tone is
heard.
(3) Dial the destination's number; the service set tone is heard.
(4) Replace the handset.
• Using the function/soft key
(1) Lift the handset; the dial tone is heard.
(2) Press each function/soft key for setting the corresponding Call Forwarding service; the special dial
tone is heard.
(3) Dial the destination's number; the service set tone is heard.
(4) Replace the handset.
[Cancel the service]
• Using the access code
(1) Lift the handset; the dial tone is heard.
(2) Dial each access code for canceling the corresponding Call Forwarding service; the service set tone is
heard.
(3) Replace the handset.
• Using the function/soft key
(1) Lift the handset; the dial tone is heard.
(2) Press each function/soft key for canceling the corresponding Call Forwarding service; the service set
tone is heard.
(3) Replace the handset.
CALL FORWARDING SUPPLEMENTARY SERVICE (SS-CF) WITH REROUTING
NDA-24305 CHAPTER 6
Page 259
Revision 1.0