NEC NEAX 2400 IPX Programming Manual page 73

STEP 6: AAED - Used to assign Announcement equipment. Assign:
TN:
EQP:
0:
1:
2:
3:
4:
5:
6:
7:
8-15:
RT, TK: Route & Trunk number of the trunk connected to the Announcement Equipment;
C:
R:
A:
M:
STEP 7: ACFR - Assignment of Call Forwarding Restriction. Upon determining which types of Call Class
Indexes (CCI) will be answered via CALL FORWARDING-INTERCEPT; for example,
DID call; allow that CCI a Transfer Service Feature Index of 1, for CALL
FORWARDING-ALL CALLS, DON'T ANSWER, BUSY.
CALL FORWARDING-INTERCEPT/ANNOUNCEMENT-PRI
Tenant Number;
Announcement Equipment Number
Dead Level
Unused Number (LCR OPR not programmed)
Available
Available
Outgoing Trunk Group Busy Announcement
Available
Available
Outgoing Route Restriction Announcement
Available for ANNOUNCEMENT SERVICE [A-15] applications.
Duration of Connection, 0/1: Disconnection occurs in 30 seconds/the connection
is held until the station releases. See the requirements of the announcement
equipment.
Sending RBT, 0/1: Sending RBT/Not sending RBT. Normally assign data "0".
Answer Signal Sending, 0/1: No answer from Incoming trunk/Answer from
Incoming trunk. Normally assign data "0". No answer signal is sent to the CO.
Therefore calling party will not be billed for the call.
Multiple Connection 0/1: Single Connection/Multiple Connection. See the
requirements of the announcement equipment.
NDA-24305 CHAPTER 5
Page 55
Revision 1.0