NEC NEAX 2400 IPX Programming Manual page 57

Operations when the boss answers the secretary.
Case 1:
1. Boss presses the: "ANSWER" key or "TRANSFER" key. If Boss has a single line telephone, flashes hook
switch.
2. Boss converses with Secretary (Trunk "A" is placed on hold).
3. Secretary hangs up, Boss is speaking with Trunk "B".
Case 2:
1. Boss presses the "ANSWER" key or "TRANSFER" key. If Boss has a single line telephone, flashes hook
switch.
2. Boss converses with Secretary (Trunk "A" is placed on hold).
3. Boss presses 201 key and converses with Trunk "A", Secretary hears Reorder Tone.
Case 3:
1. Boss hangs up, Boss' station rings and Secretary hears Ringback Tone.
2. Boss lifts the handset and converses with Secretary.
3. The rest of operations are same as Item 3 of
Case 4:
If Boss does not respond to 3 bursts of Waiting Tone:
Secretary presses "CALL HOLD" key to resume talking to Trunk "B".
3. Programming
STEP 1: ASYD - System Data 2, Index 10, bit4: 1 = Dialing "ACC Code + Station No." is available.
STEP 2: ANPD - Assign a number level for feature access code.
STEP 3: ASPA - Assign an access code to BOSS SECRETARY OVERRIDE, SRV=SSCA, SIDA=53
STEP 4: ASFC - Allows following restriction; SFI5, 6, 10, 11 and 51.
STEP 5: AKYD - Boss' My-line must be assigned as a sub-line on the secretary's phone.
(Call Waiting-Originating)
bit7: Call Waiting Tone 0/1=Once/At Intervals.
Case 1 or Case 2 .
NDA-24305
BOSS-SECRETARY OVERRIDE-PRI
CHAPTER 5
Page 39
Revision 1.0