NEC NEAX 2400 IPX Programming Manual page 244

EVENT BASED CCIS - ISDN TRANSPORT
Examples of Data Assignment for the E-CCIS line
• Example of port allocation when using Called Sub Address as addressing information
RT110 TK1
RT120 TK1
RT20 TK3
RT20 TK2
RT20 TK1
RT10 TK19
RT10 TK18
RT10 TK17
RT10 TK16
RT10 TK2
RT10 TK1
DID Number for incoming calls from an E-CCIS line:
DID Number for incoming calls from an alternate route:
Data assignment procedure related to the E-CCIS line is shown below.
STEP 1: ARTD - RT20 CDN 45 A/D: 0 (Voice information is transmitted)
The same value in "DC" assigned for ISDN B channel must be programmed to both E-CCIS Signal and
Note:
Speech route (RT10-CDN66 DC: 4).
STEP 2: ARTI - RT20
CHAPTER 6
Page 226
Revision 1.0
24PRT
ISDN D-channel
E-CCIS Signal Channel
E-CCIS Speech Channel
E-CCIS Speech Channel
E-CCIS Speech Channel
ISDN B-channel
ISDN B-channel
ISDN B-channel
ISDN B-channel
ISDN B-channel
ISDN B-channel
CDN 49 TRKS: 0 (Select the trunk (CIC No.) in ascending order)
CDN 66 DC: 4
RT120 CDN 66 DC: 4
ECCIS:
ECCISTM:
ECCISOB:
ECCISIB:
ECCISTD:
RT120 ECCIS:
ECCISTM :
ECCISOB:
ECCISIB:
ECCISTD:
Sub Address: 9803
Sub Address: 9802
Sub Address: 9801
Sub Address: 9800
0471-81-3500
0471-81-3600
1 (E-CCIS Route)
5 (Release timer: 5 minutes)
1 (OG billing for the E-CCIS line is required)
1 (IC billing for the E-CCIS line is required)
1 (Addressing information: Sub Address)
1 (E-CCIS Route)
3 (Release timer: 1 minute)
1 (OG billing for the E-CCIS line is required)
1 (IC billing for the E-CCIS line is required)
1 (Addressing information: Sub Address)
NDA-24305
Note
Note
Note