NEC NEAX 2400 IPX Programming Manual page 77

3. Programming
STEP 1: ASYD - System Data 1, Index 142:
STEP 2: ANPD - Reserve a number level for feature access and retrieval. Assign for normal and hooking.
STEP 3: ASPA - Assign an access code to:
STEP 4: ASFC - Assign a Service Feature Class that allows SFI 67 to the applicable stations. This allows the
STEP 5: ASAT - This command must be assigned to designate a specific station number to the Attendant
b7
TC
Timer Class
TC = 3 : 2 Sec. Increments
TC = 4 : 30 Sec. Increments
System Data 2, Index 1, bits 0&1: CONSULTATION HOLD-ALL CALLS [C-17]
Assign NND in accordance with a predetermined numbering plan.
(a) CALL PARK access code, SRV = SSC, SID = 61, Connection Index of Hooking.
(b) CALL PARK local retrieval code, SRV = SSC, SID = 62, Connection Index of
Normal.
(c) CALL PARK remote retrieval code, SRV = SCC, SID = 63, NND = number of digits
in the access code, and assign a Connection Index of Normal.
station to park a call and to retrieve a parked call. Assign stations a Service Feature Class
the allows SFI 68, CALL PARK called. This allows a station to be parked by another
station or Attendant Console.
Console. This number is used to identify the Attendant Console when parking a call.
For CALL PARK recall, the Miscellaneous Timer
Counter is assigned in bits 0-3. The Timer Class is
assigned in bits 4-6. Timer Class of 3 = 2 seconds.
Timer Counter of 4 = 30 seconds. (Default: 450
seconds.)
b4 b3 b0
MTC
Misc. Timer
Counter
allowed or denied.
00: Denied: 01:Originating and Terminating Calls
allowed, 10:Tandem Call Denied 11:All calls allowed.
NDA-24305
CALL PARK-PRI
CHAPTER 5
Page 59
Revision 1.0