NEC NEAX 2400 IPX Programming Manual page 191

STEP 6: AFCP - Assign the transfer destination.
(For more information, see
DAY/NIGHT: Day mode/Night mode
TN:
CALLING PARTY: (Max. 32 digits) Called Station Number (
CFSI: Call Forwarding Service Feature (0~3)
→
ITC:
CFD:
STN:
ADC: Abbreviated Digit Code (Max. 3 digits)
Assign Called Station Number by the physical station number PCS terminal's number cannot be
Note 1:
assigned here.
Enter the Access Code assigned in the ACND command (DC).
Note 2:
This data (=1) can be assigned when the CFSI is DTI (=3).
Note 3:
This parameter appears when the input data in the CFD is 0.
Note 4:
Note 5: This parameter appears when the input data in the CFD is 2.
CALLING PARTY RECOGNITION SERVICE [DIRECT-IN TERMINATION (DIT)]
Figure
TENANT NUMBER
Calling Party Number
0-CALL FORWARDING-ALL CALLS
1-CALL FORWARDING-BUSY LINE
2-CALL FORWARDING-DON'T ANSWER
3-DIRECT-IN TERMINATION
Information Transfer Capacity (0~2)
0-Speech
1-Unrestricted (Digital Data)
2-Audio (Modem)
Call Forwarding Destination (0~3)
0-Speech
1-ATT
2-External
3-Not used
Station Number of the Destination (Max. 5 digits)
NDA-24305
6-1.)
Note 3
Note 4
Note 5
Note 1 ) + ACC ( Note 2 ) +
CHAPTER 6
Page 173
Revision 1.0