NEC NEAX 2400 IPX Programming Manual page 195

STEP 1: Assign the Basic Data for ISDN (Refer to
STEP 2: ARTD - Assign the number of digits to be decoded in the System to the parameter DC (CDN=66)
of the Route of the B-channels and D-channel of a 24PRT which interfaces with the ISDN
line with DID addressing.
Note:
STEP 3: ACDD - Assign a Conversion Number for the Route of the B-channels in which the number of
decoding digits has been assigned with the ARTD command.
•
•
CALLED PARTY TERMINATING
NUMBER STATION NO.
438-3000
438-3001
438-3100
438-3101
438-3200
<Example 1>
4000/4001
<Example 2>
220/221
<Example 3>
5150
Specify "DC" on a route basis.
Assign "0" to the parameter "AD".
If there are no attendant consoles in the system, set the DAY/NIGHT parameter to "N"
(Night Mode). The system functions as if in Night Mode.
Example of Office Data Assignment for DID Line (Digit Conversion)
ARTD
DC
4000 4
4001 4
220 3
221 3
5150 4
PBX
DID NO. 438-3000/3001
PBX
DID NO. 438-3100/3101
PBX
DID NO. 438-3200
NDA-24305
Chapter 3.)
ACDD
DC CDC
3000 4000
3001 4001
100 220
101 221
3200 5150
ISDN
ISDN
ISDN
DID ADDRESSING
REMARKS
See Example 1
See Example 2
See Example 3
CALLING PARTY
CALLING PARTY
CALLING PARTY
CHAPTER 6
Page 177
Revision 1.0