C-97D Call Pickup-Group-D - NEC NEAX 2400 IPX Programming Manual

CALL PICKUP-GROUP-D
C-97D CALL PICKUP-GROUP-D
1. General Description
This feature permits a station user to answer an ISDN network call directed to another line in a preset CALL
PICKUP-GROUP by using a programmable line/feature key.
CALL PICKUP-GROUP-D
term
D .
2. Operating Procedure
Picking up an incoming call:
1. An incoming call from the ISDN network terminates to a trunk.
2. The stations within the same call pickup group ring.
3. Lifts the handset; receives Dial Tone.
4. Press the call pickup group feature key; the call is connected to the station. The LCD displays:
term
[D Series III]
CALLED
STATION
PCK
XXXX
(Time Display)
Picking up an incoming call (consultation Hold):
1. An incoming call from the ISDN network terminates to a trunk.
2. The stations within the same call pickup group ring.
3. Press the "TRANSFER"/"CALL HOLD" feature key; receives Special Dial Tone.
4. Press the call pickup group feature key; the call is connected to the station.
5. The first party is put on CALL HOLD [C-6] status.
3. Programming
STEP 1 ~ STEP 3: Refer to
STEP 4: AKYD - Optional. Assign a programmable Line/Feature key as a CALL PICKUP key. Assign KYI
= 1 and FKY = 12.
CHAPTER 5
Page 48
Revision 1.0
term
-PRI
term
-PRI
term
-PRI may be used by seizing Dial Tone from any multi-line appearance on the
CALLING
STATION/TRUNK
XXXX
[C-97] "CALL PICKUP-GROUP-PRI"
term
[D Series E]
PICK UP
(Time Display)
in this manual.
NDA-24305
CALLED CALLING
STATION STATION/TRUNK
XXXX
XXXX