EVENT BASED CCIS - Q-SIG TRANSPORT
•
Station Controlled Conference – CCIS [S-56]
•
Station-to-Station Calling – CCIS [S-57]
•
Station-to-Station Calling – Operator Assistance – CCIS [S-58]
•
Step Call – CCIS [S-59]
•
Synchronous Data Switching – CCIS [S-60]
•
Supervisory Call – CCIS [S-73]
•
Toll Restriction – 3/6-Digit – CCIS [T-26]
•
Trunk Answer from Any Station – CCIS [T-27]
•
Uniform Numbering Plan – CCIS [U-5]
•
Voice Call – CCIS [V-7]
When A/D=1 (Digital) is assigned by CDN45, ARTD, this feature is available.
Note:
4. Programming
STEP 1: Assign the Basic Data for ISDN. (Refer to
STEP 2: Assign CCIS No.7 related data.
Assign the LEN of the DCH for controlling E-CCIS route at the CCH parameter of the ACSC command.
Note:
STEP 3: ARTD - Assign the Bearer Capability for the speech channels of the E-CCIS line.
CHAPTER 6
Page 234
Revision 1.0
CDN45 A/D:
0/1= Analog (Bearer Capability: Speech)/Digital (Bearer Capability:
CDN49 TRKS: 0/1= select the trunk in ascending order/descending order (CIC No. is
Chapter
3.)
Unrestricted Digital)
programmed by the ACSC command)
NDA-24305