NEC NEAX 2400 IPX Programming Manual page 95

3. Programming
STEP 1: Assign the Basic Data for ISDN. (Refer to
STEP 2: AUNE - Assign Uniform Numbering Data in a terminating office.
STEP 3: AMND- Assign DC (Destination Code) including ACC and/or Uniform No. and MND (Necessary
STEP 4: RRC - Allow the restriction between Incoming PRI and Dummy route.
<Example>
Uniform Numbering
8 + 632 + 5XXX
Inter-office coordinate Numbering
632 + 5XXX
Number of digits)
A/D=D
DATA UNIFORM NUMBERING PLAN-PRI
Chapter 3, "Basic Data Assignment for
Station No.
Uniform No.
LCR Access Code
Skip Digits
Station No.
Uniform No.
Skip Digits
NDA-24305
ISDN")
CHAPTER 5
Page 77
Revision 1.0