D-116D Do Not Disturb-D - NEC NEAX 2400 IPX Programming Manual

D-116D DO NOT DISTURB-D

1. General Description
This feature allows a station user to set Do Not Disturb status. Incoming ISDN calls will be denied access to the
My-line while DND status is in effect.
2. Operating Procedure
To set Do Not Disturb:
Press the Do Not Disturb ("DND") Key. The associated LED will light. The LCD displays:
To cancel Do Not Disturb:
Press the Do Not Disturb ("DND") Key. The LED will go out. The LCD displays:
term
[D Series III]
DND CNCL
3. Programming
STEP 1: AKYD - Assign the following key data for the D
TN:
STN: Station Number
TP:
KYN: Key Number (1-40)
KYI:
KD:
FKY: Function Key Number
STEP 2: ASFC - Select an indication type (RST/DND) on the display of a D
station which has been set DO NOT DISTURB.
SFI= 114 Calling Party DND Indication (D
term
-PRI
DND SET
(Time Display)
XXXXXXXX
(Time Display)
1
term
Type of D (0~3)
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line key
Not assigned for Feature Key
FKY=50, DO NOT DISTURB.
0/1: RST/DND
XXXXXXXX
term
[D Series E]
DND CANCEL
term
.
term
)
NDA-24305
DO NOT DISTURB-D
XXXXXXXX
(Time Display)
term
when it terminates to a
CHAPTER 5
Revision 1.0
term
-PRI
Page 67