User Mobility Assignment - NEC UNIVERGE SV9300 Networking Manual

USER MOBILITY ASSIGNMENT

To make an outgoing call when IP Station logged in to the destination unit (visitor unit), do the following
programming.
START
CM12 Assign the unit number of the original unit
(home unit) of IP Station.
Assign Service Restriction Class C to each sta-
tion.
CM15 Specify the tenant for outgoing call trunk route
choice when IP Station log in to the destination
unit (visitor unit).
NOTE:
CM0B Assign the tenant number for IP Station ac-
commodated in the Unit when IP Station log in
to the destination unit (visitor unit).
NOTE:
CM12 Assign the tenant number to each station when
IP Station log in to the destination unit (visitor
unit).
NOTE:
A
DESCRIPTION
Set the second data 0 when making
an outgoing call using the trunk
route of destination unit (visitor
unit). Also, set the second data 1
when making an outgoing call using
the trunk route of original unit
(home unit).
This data is effective when the sec-
ond data of CM15 Y=196 is set to 0.
This data is effective when the sec-
ond data of CM15 Y=196 is set to 1.
Chapter 3 REMOTE UNIT OVER IP FEATURES
• Y=64
(1) X-XXXXXXXX: IP Station No. assigned
(2) 01-50: Unit01-50
• Y=07
(1) X-XXXXXXXX: Station No.
(2) XX: 00-15 : Service Restriction Class C
• Y=196
(1) 00-15
(2) 0 : Tenant of the visitor unit to which IP
Station logged in (CM0B Y=1XX>11)
1 : Station tenant (CM12 Y=04)
• Y=1XX (VOIP Port [1] + Unit No. [01-50])
(1) 11
(2) 00-63: Tenant No. 00-63
01 : Tenant No. 01
• Y=04
(1) X-XXXXXXXX: Station No.
(2) 00 : Tenant No. 00
01 -63: Tenant No. 01-63
3-35
USER MOBILITY ASSIGNMENT
DATA
by CM10 Y=01
NWA-088654-001 Rev.1.0
94ch3001.fm