Remote Unit Over Ip Voipdb Data Assignment - NEC UNIVERGE SV9300 Networking Manual

REMOTE UNIT OVER IP VoIPDB DATA ASSIGNMENT

START
CM0B Assign the IP address for the VoIPDB.
NOTE:
Assign the Subnet Mask for the VoIPDB.
NOTE:
Assign the Default Gateway Address for the
VoIPDB.
NOTE 1:
NOTE 2:
Assign the IP address (RTP) for the VoIPDB.
NOTE:
A
DESCRIPTION
The second data must be entered
including the periods (.).
The second data must be entered
including the periods (.).
The second data must be entered
including the periods (.).
Only one Default Gateway Address
can be set for the system.
The second data must be entered
including the periods (.).
Chapter 3 REMOTE UNIT OVER IP FEATURES
REMOTE UNIT OVER IP VoIPDB DATA ASSIGNMENT
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 00: IP Address
RESET
(2) XXX.XXX.XXX.XXX:
0.0.0.1-255.255.255.254:
IP Address (Maximum 15 digits)
NONE : No data
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 01
RESET
(2) XXX.XXX.XXX.XXX:
255.0.0.0-255.255.255.252:
Subnet Mask (Maximum 15 digits)
NONE : No data
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 02
(2) XXX.XXX.XXX.XXX:
RESET
0.0.0.1-255.255.255.254:
Default Gateway Address (Maximum 15
digits)
NONE : No data
• Y=2XX (VOIP Port [2] + Unit No. [02-50])
(1) 00: IP Address
RESET
(2) XXX.XXX.XXX.XXX:
0.0.0.1-255.255.255.254:
IP Address (Maximum 15 digits)
NONE : No data
3-27
DATA
NWA-088654-001 Rev.1.0
94ch3001.fm