Busy Verification-Ccis - NEC UNIVERGE SV9300 Networking Manual

BUSY VERIFICATION-CCIS

General Description
This feature permits an Attendant, via the Attendant Console on the 2400 IPX or the SV9300, to interrupt
a busy station's call at another switching office connected through CCIS.
Programming
START
CM08 Provide the system with Busy Verification.
Specify whether the Warning Tone is sent to
the connected parties.
• Three burst tone
[Other than New Zealand]
• One burst tone
[New Zealand Only]
Specify the Warning Tone sent to connected
parties.
Specify whether the Warning Tone is sent to
C.O. line, when a station/operator overrides a
busy station which is connected to a C.O. line.
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Busy Verification in Service Restriction
Class A assigned by CM12 Y=02.
END
DESCRIPTION
(1) 012
(2) 1 : Available
(1) 046
(2) 0 : Not sent
1 : To send
(1) 045
(2) 0 : Only the first once
1 : Every 4 seconds
(1) 076
(2) 0 : To send
1 : Not sent
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=009
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 1 : Allow
1-80
Chapter 1 CCIS FEATURES
BUSY VERIFICATION-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm