Remote Unit Over Ip Vlan Data Assignment - NEC UNIVERGE SV9300 Networking Manual

REMOTE UNIT OVER IP VLAN DATA ASSIGNMENT

(1) VLAN Data Assignment for Main Unit
See "VLAN Data Assignment" in the System Manual.
(2) VLAN Data Assignment for Remote Unit
START
CM0B Provide the VLAN with the Remote Unit.
NOTE:
Specify the priority of the VLANS.
NOTE:
Assign the VLAN ID to the Remote Unit.
NOTE 1:
NOTE 2:
END
DESCRIPTION
Assign the IP Address and the
Subnet Mask that have been set by
CM0B Y=0XX/1XX>00, 01.
The higher number has higher pri-
ority.
One VLAN ID can be set per system.
VLAN ID 0 is not available.
Chapter 3 REMOTE UNIT OVER IP FEATURES
REMOTE UNIT OVER IP VLAN DATA ASSIGNMENT
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 50
RESET
(2) 0: To provide
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 51
RESET
(2) 0-7 : Priority 0-7
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 52
RESET
(2) 1-4094 : VLAN ID 1-4094
NONE
3-29
DATA
NOTE
NOTE 2
: No data
NWA-088654-001 Rev.1.0
94ch3001.fm