Attendant Camp-On With Tone Indication-Ccis - NEC UNIVERGE SV9300 Networking Manual

ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS

General Description
This feature allows the Attendant Console to perform a full automatic Camp-On operation, even when a
call-forwarded station is busy at a call-forwarding from the Attendant Console to a remote office station
via CCIS, by enabling the Attendant Console to automatically recall the station for connecting the external
call after the station becomes idle.
Station Application
Attendant Console
Programming
START
CM20 Assign the access code for LCR Group 3.
NOTE:
CM08 Specify the Camp-On Tone sent to busy sta-
tion.
CM36
Allow the connection between a trunk route for
external lines and a CCIS trunk route.
CM41 Specify the recall timing of Camp-On.
END
DESCRIPTION
When providing Attendant Camp-
On with Tone Indication-CCIS, be
sure to set the second data to A129
(LCR Group 3).
ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A129: LCR Group 3
(1) 068
(2) 0 : Camp on Tone is sent out only the first
once
1 : Camp on Tone is repeated at 4 second
intervals
• Y=0
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
(2) 0: Allow
• Y=0
(1) 00
(2) 01-14: 2.4-33.6 seconds
(2.4 second increments)
15-24: 38.4-124.8 seconds
(9.6 second increments)
If no data is set, the default setting is 31.2-33.6
seconds.
1-69
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm