Vrs/Disa One-Digit Code Attendant Setup - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single digit dialing
Program
through the VRS. This gives VRS callers single key access to extensions, the company operator,
Department Calling Groups and Voice Mail. For each VRS message set to answer outside calls (refer
25
to Program 25-04 and 25-05), you specify:
• The digit the VRS caller dials (0~9,
outside callers cannot dial system extensions.
• The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master
number. A one-digit code can be assigned for each Automated Attendant message.
Example:
Message Number=01, Destination=2, Next Message Number=0, Dial=399
In this example, when 2 is dialed by an outside caller, the system transfers the call to 399. This means
that extension 200~299 cannot receive calls from VRS/DISA users during/after VRS Message 01.
Input Data
I e t m N . o
01
02
Conditions
• Outside caller may not be able to dial individual extensions or lines if the same first digit is defined
here.
Feature Cross Reference
• Direct Inward System Access (DISA)
• Voice Response System (VRS)
2-262

25-06 : VRS/DISA One-Digit Code Attendant Setup

Attendant Message Number
Received Dial
I e t m
Next Attendant Message Number
Destination Number
Program 25 : VRS/DISA Setup
*
, #). Keep in mind that if you assign destinations to digits,
n I p t u D a
0~100 (0 = No Setting)
101 = Voice Mail answers
104 = Refer to 25-04 : VRS/DISA Transfer
Ring Group With No Answer/Busy
2-260.
105 = Dial the other extension
Up to four digits
01~100
, #
1~9, 0,
*
a t D e
on page
No Setting
Program 25 : VRS/DISA Setup
Issue 0.1
a f u t l
0