Did Intercept Ring Group - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the first
destination group for DID calls.
Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls route to the first desti-
nation group by the following:
• Vacant number intercept (vacant number means that no phone is connected, no station unit is in-
stalled, or the extension number is not defined in Program 11-02)
• Busy intercept
• Ring-no-answer intercept
If the destination is 0, the calls are forwarded to the trunk ring group defined in Program 22-11 based
on the table assigned to the DID trunk.
If Programs 22-11-05 and 22-11-06 are set, the priority oft ransferring is in this order: Program 22-
11-05 + Program 22-11-06 + Program 22-12.
For busy and no-answer calls, if the first and third destinations are programmed, but the
second destination is not, the incoming call goes to the third destination after the first destina-
tion. If the first and second destinations are not defined, but the third destination is, the call
goes directly to the third destination.
Input Data
Conversion Table Area Number
Item No. Day/Night Mode
0 1
Conditions
None
Feature Cross Reference
• Direct Inward Dialing (DID)
Programming Manual
Program 22 : Incoming Call Setup

22-12 : DID Intercept Ring Group

1 ~ 8 0 = N o
1~25 = Incoming Ring Group
101 = Not Used
102 =VMI
103 = Not Used
01~20
Incoming Group Number
S e t t n i g
SL1000
Program
22
Default
1
2-237