NEC SL1000 Programming Manual page 125

Issue 0.1
Item No. Item
05 Transfer Key Operation Mode
Use this option to set the operating
mode of the extension CONF key. The
keys can be for Call Transfer, Serial
Calling or Flash. When selecting the
Flash option (selection 2), refer also to
Program 81-01-14.
06 Hold Key Operating Mode
Use this option to set the function of the
Multiline Hold key. The Hold key can
activate normal Hold or Exclusive Hold.
07 Automatic Hold for CO Lines
When talking on a CO call and another
CO line key is pressed, the original
trunk is placed on Hold (0) or Discon-
nected (1).
08 Automatic Handsfree
Use this option to set whether pressing
a key accesses a One-Touch Key or if it
preselects the key.
10 Ringing Line Preference for Trunk
Calls
Use this option to select between Idle
and Ringing Line Preference for trunk
calls.
11 Callback Automatic Answer
Use this option to enable or disable
automatic answer of calls recalling to a
station. For example, if a Transfer
Recall or Hold Recall is ringing back to
a station, the following happens:
If PRG 15-02-11 is enabled, the station
will automatically answers the recall
when it goes off-hook.If PRG 15-02-11
is disabled, a station does not automati-
cally answer the recall when it goes
off-hook. The user must first press the
line appearance of the recalling call or
press the answer key.
12 Off-Hook Ringing
Use this option to set the telephone
Off-Hook signaling. Off-hook signaling
occurs when a telephone user receives
a second call while busy on a handset
call. To enable/disable Off-Hook
Signaling for an extension Class of
Service, use Program 20-13-06.
13 Redial List Mode
Select whether the Redial List feature
should store internal and external
numbers (0), or only external numbers
(1).
15 Storage of Caller-ID for answered call
16 Handsfree Operation
Enable or disable an extension ability to
use the speakerphone on outside calls.
When disabled, users can hear the
conversation, but cannot respond
handsfree.
Programming Manual
Input Data
0=Transfer
1=Call back
2=Hook
0=Normal (Common)
1=Exclusive Hold
2=Park Hold
0=Hold
1=Disconnect (Cut)
0=Preselect
1= One-Touch (Automatic Handsfree)
0=Idle (Off)
1=Ringing (On)
0=Off
1=On
0=Muted Off-Hook Ringing
1=No Off-Hook Ringing
2=Not Used
3=Beep in Speaker (SP)
4=Beep in Handset (HS)
5=Speaker & Handset Beep
0=ICM/Trunk (Extension/Trunk Mode)
1=Trunk Mode
0=Disable (Off)
1=Enable (On)
0=Disable (Off)
1=Enable (On)
SL1000
Default Related Pro-
gram
0
0
1
1
1
1
0
1
1
1
2-105
Program
15