Dial Analysis Extension Table - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis Extension Table to set
the dial extension analysis table. These tables are used when the analyzed digits must be more than
eight digits. If the received digits do not match the digits set in tables 1~250, table number 252 is used
to refer to the next Extension Table Area (1~4) to be searched. If the received digits are not identified
in tables 1~250, the F-Route selection table number defined in table 251 is used.
Input Data
Extension Table Area Number
Dial Analysis Table Number
Dial Analysis Table Number : 1~250
Item No. Item
01 Dial
02 ARS/F-Route Select Table
Number
Dial Analysis Table Number : 251
Item No. Item
03 ARS/F-Route Select Table
Number
Dial Analysis Table Number : 252
Item No.
04 Next Table Area Number
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS)
Programming Manual
Program 44 : ARS/F-Route Setup

44-03 : Dial Analysis Extension Table

Input Data
Up to 36 digits
Digits = 1~9, 0, , #, @
*
(Press Line Key 1 for wild character @)
0~100 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is checked.
With Program 44-01 set to 1, Program 44-04 is checked.
Input Data
0~100 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is checked.
With Program 44-01 set to 1, Program 44-04 is checked.
Item
1~4
1~252
Input Data
0~4
SL1000
Program
44
Default
No Setting
0
Default
0
Default
0
2-341