NEC SL1000 Programming Manual page 107

Issue 0.1
Item No. Item
22
Caller ID to Voice Mail
Enable or disable the system ability
to send the Caller ID digits
(Remote Log-On Protocol) to voice
mail.
23
Least Cost Routing
24
Trunk-to-Trunk Outgoing Caller
ID through Mode
Enable (1) or Disable (0) the ability
to send the original Caller ID
through when the call is Forward
Off-Premise.
25
Continued/Discontinued Trunk-
to-Trunk Conversation
Enable (1) or Disable (0) the ability
to dial a service code code to
continue or disconnect the Trunk-
to-Trunk conversation after the
alert tone is heard.
26
Automatic Trunk-to-Trunk Trans-
fer Mode
27
Caller ID Refuse Setup
28
Effectivity of "Conversation Re-
cording Destination for
Extension"
30
Flexible Ringing by Caller ID
32
Anti-trombone Function
33
APSU(VM00) Trunk Receive Gain
Additional PAD when a trunk call
connects to APSU Voice Mail.
35
DT700 Large LED Illumination
Setup
Sets LED color for incoming trunk
call. InDT700 local terminal setting
menu, Illumination setting must be
'Automatic' , otherwise the terminal
will ignore PRG 14-01-35, PRG
15-05-37 and PRG 15-23 settings.
Default
Item01: Trunk Name
Trunk Port Number
1
2
126
Conditions
None
Programming Manual
Input Data
0 = Disable (No)
1 = Enable (Yes)
0 = LCR Off
1 = LCR On
2 = LCR On (Cost Center
Code only)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Normal Transfer
(Normal)
1 = Step Transfer (Step)
0 = Disable (No)
1 = Enable (Yes)
0 = No Effect (No)
1 = Available (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = No Effect (No)
1 = Available (Yes)
1~63
(-15.5dB ~ +15.5dB in
0.5dB intervals)
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
:
SL1000
Related Pro-
Default
gram
0
0
0
0 20-28-01
20-28-02
20-28-03
24-02-07
24-02-10
25-07-07
25-07-08
0 24-02-11
24-02-12
0
1 15-12
1 13-04
0
32 (0dB)
2
Name
Line 001
Line 002
:
Line 126
Program
14
2-87