Program 26 : Ars Service & Least Cost Routing; Automatic Route Selection Service - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Program
Use Program 26-01 : Automatic Route Selection Service to define the system options for Automatic
26
Route Selection (ARS).
Input Data
Item
No.
01 ARS Service
Enable or disable ARS.
02 Network Outgoing InterDigit ARS Time
With Networking, this time replaces 20-03-04
when determining if all network protocol digits
have been received. If ARS is enabled at Site
B, this time can be programmed for 5 (500ms)
at Site A. If ARS is disabled and Site B is
using F-Route for outbound dialing, this time
should be programmed for 30 (three seconds)
at Site A.
03 ARS Misdialed Number Handling
If a user dials a number not programmed in
ARS, this option determines if the system
should route over Trunk Group 1 or play error
tone.
04 LCR Mode Option
06 Class of Service Match Access
07 F-Route Access COS Reference
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS)
2-272
Program 26 : ARS Service & Least Cost

26-01 : Automatic Route Selection Service

Item Input Data Default
0 = Disable (Off)
1 = Enable (On)
0~64800 (sec)
0= Route to Trunk
Group 1
1 = Play Warning Tone
to Dialer
0 = UK style
1 = Not UK style
0 = Disable (Off)
1 = Enable (On)
0 = F-Route
1 = ARS
Program 26 : ARS Service & Least Cost Routing
Issue 0.1
Routing
Related Pro-
gramming
0 26-02
26-03
26-04
30 20-03-04
0 21-02
0 26-02
26-05
26-06
26-07
26-08
26-09
0 26-02
0 26-02
44-05