Smdr Output Options - NEC SL1000 Programming Manual

Issue 0.1
Program 35 : SMDR Account Code Setup
Level
IN
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Recording)
output options for each of the eight SMDR ports. Refer to the following chart for a description of each
option, its range and default setting.
Input Data
SMDR Port Number
Item No.
01 Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
02 PBX Calls
When the system is behind a PBX, SMDR can
include all calls (1) or just calls dialed using the
PBX trunk access code (0).
03 Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR
reports.
If this option is set to 1, Program
35-02-14 must be set to 0.
04 Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every
night).
05 Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
06 Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on the
last day of the month).
07 Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
08 Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls do not print.
09 Extension Number or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0) to
have the SMDR report include extension names.
10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
11 Walking Toll Restriction Table Number
Programming Manual

35-02 : SMDR Output Options

Item
1~2
Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Output
1 = Output
SL1000
Program
35
Default
1
1
1
1
1
1
1
1
1
0
1
2-321