System Options For Single Line Telephones - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use Program 20-03 : System Options for Single Line Telephones to set up various options for
single line telephones.
Program
Input Data
20
Item No.
01
SLT Call Waiting Answer Mode
For a busy single line telephone,
set the mode used to answer a
camped-on trunk call.
02
Ignore Received DP Dial on
DTMF SLT Port
Use this option to define whether
the system should receive dial
pulse and DTMF signals (0) or
ignore dial pulse and only accept
DTMF signals (1).
03
SLT DTMF Dial to Trunk Lines
When using a third-party external
paging device, set this option to 1.
In addition, set Program 20-03-04
to 1.
04
Dial Sending Start Time for SLT
or ARS
When ARS or an analog extension
user accesses a trunk and dials an
outside call, the system waits this
time before outdialing the first digit.
When using a third-party external
paging device, set this option to 1.
In addition, set Program 20-03-03
to 1.
05
SLT Operation Mode
2-140
Program 20 : System Option Setup

20-03 : System Options for Single Line Telephones

Item
• Type 0: The system keeps
the digits dialed by the single
line telephone on a trunk in a
buffer. After all the digits are
received, the system sends
all the digits to the trunk. If
the time space between digits
is longer than the time in Item
4, the system considers all
digits received.
• Type 1: The system passes
the received digits from the
single line telephone to the
trunk immediately. If the
single line telephone has a
Last Number Dial key without
a pause, this key may not be
able to use the Last Number
Dial key with the Type 1
setting.
Input Data
0=Hookflash (Hooking)
1=Hookflash + Service
Code 654
0=Do Not Ignore (No)
1=Ignore (Yes)
0=Receive all dialed data,
before sending (All)
1=Direct through out
(Direct)
0 ~ 6 4 8 0 0 s
0=Normal Mode
1=Extended Mode 1
2=Extended Mode 2
Program 20 : System Option Setup
Issue 0.1
Default Related Program
0 11-12-47
0 15-03-01
0 20-03-04
3 2 0 0 - 3 0 -
0
3