Trunk Access Code - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access code
Program
can be set from 1~8 digits which is defined to type 3 and 4 in Program 11-01. This is the code exten-
sion users dial to access Automatic Route Selection. The Individual Trunk Access Code is used when
11
Trunk Group Routing is desired for an outgoing line.
The digit 9 is defined in Program 11-01 as Dial Type( ) with the Number of Digits Required set to ( ). If you change the
trunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.
Input Data
Item No.
01
02
Conditions
None
Feature Cross Reference
• Automatic Route Selection
• Central Office Calls, Placing
• Trunk Group Routing
2-54
Program 11 : System Numbering

Trunk Access Code

Dial (Up to four digits) Use this program to
assign the trunk ac-
cess code (normally
9). This is the code
extension users dial to
access Automatic
Route Selection.
2nd Trunk Route Access Use this program to
Code define additional trunk
access codes.
When a user dials the
Alternate Trunk Route
Access Code, the
system routes their call
to the Alternate Trunk
Route.
11-09 : Trunk Access Code
Caution!
Description Default
No Setting
Program 11 : System Numbering
Issue 0.1
Related Program
0 • 11-01 : System
Numbering
• 14-01 ~ 07 : Basic
Trunk Data Setup
• 14-05 : Trunk
Group
• 14-06 : Trunk
Group Routing
• 21-02 : Trunk
Group Routing for
Extensions
• 11-01 : System
Numbering
• 14-01 - 07: Basic
Trunk Data Setup
• 14-05 : Trunk
Group
• 14-06 : Trunk
Group Routing
• 21-02 : Trunk
Group Routing for
Extensions
• 21-15 :Indiviidual
Trunk Group
Routing for Exten-
sions