NEC SL1000 Programming Manual page 176

SL1000
Item No.
12 Room Monitor, Extension Being
Monitored
Turn off or on an extension ability
to be monitored by other
extensions.
13 Continued Dialing (DTMF) Signal
on ICM Call
Turn off or on an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
Program
while talking on extension.
14 Department Calling (PLT No
20
Called Extension)
Turns off or on an extension user
ability to call a Department Group
Pilot.
15 Barge-In, Initiate
Turns off or on an extension user
ability to barge-in on other's calls.
16 Barge-In, Receive
Turns off or on an extension ability
to have other extensions barge-in
on calls.
17 Barge-in Tone/Display (Intrusion
Tone)
Turns off or on the Barge-In tone. If
on, callers hear an alert tone and
their display indicates the Barge-In
when another extension barges
into their conversation. If off, there
is no alert tone or display
indication.
18 Programmable Function Key
Programming (General Level)
Turns off or on an extension user
ability to program General function
keys using Service Code 851 (by
default). (Refer to Program
20-07-10 for Service Code 852.)
19 Selectable Display Messaging
(Text Messaging)
Turns off or on an extension user
ability to use Selectable Display
Messaging.
20 Account Code/Toll Restriction
Operator Alert (Restricted Op-
eration Transfer)
Turns off or on operator alert when
an extension user improperly
enters an Account Code or violates
Toll Restriction.
21 Extension Name
Turns off or on an extension user
ability to program its name.
22 Busy Status Display (Called
Party Status)
Turns off or on the ability to display
the detailed state of the called
party.
23 Display the Reason for Transfer
Select whether an extension
should display the reason a call is
being transferred to their extension
(Call Forward Busy, Call Forward
No Answer, DND).
2-156
Item Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Default Related Program-
ming
COS 01~15
0
1
1
1
1
1
1
1
1
1
0 20-13-06
0
Program 20 : System Option Setup
Issue 0.1