Connection Of Pulse Command Output Signal; Line Driver Output Type; Transistor Output Type - Panasonic FP2-PP2T Technical Manual

3.4 Connection of Pulse Command Output Signal

Two types of output types are available for the FP2 positioning unit due to two types of the interfaces of
motor driver. Select and connect one or the other, depending on the interface of the motor driver being
used.
Note:
We recommend using twisted - pair cables as the wiring between the positioning unit output and the
motor driver, or twisting the cables to be used.

3.4.1 Line Driver Output type

3.4.2 Transistor Output Type

Note:
A value of 15 mA per signal should be used as a guide. If exceeds this, resistance should be added.
3-9