Huawei NetCol8000-C070 User Manual page 108

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Table 4-3 Notes for the screen
No.
1
2
3
4
5
6
7
8
9
10
Issue 07 (2021-12-30)
Item
Permission status
USB status
Diagnostic mode status
Buzzer status
Critical alarms
Major alarms
Minor alarms
Warnings
Status bar
Alarm bar
Copyright © Huawei Technologies Co., Ltd.
Note
indicates that you have not logged in to
the system. indicates that you have
logged in to the system as an operator user.
indicates that you have logged in to the
system as an admin user.
in the status bar indicates that the USB
flash drive is successfully connected to the
display panel.
in the status bar indicates that the smart
cooling product is in diagnostic mode. Tap the
icon to exit from the diagnostic mode.
The buzzer status can be set to On or Off. The
icon indicates that the buzzer is on. When
the buzzer is on, it buzzes when an alarm is
generated. When the buzzer is buzzing, you
can tap anywhere on the screen to mute the
buzzer. After the buzzer is muted, it still
buzzes when a new alarm is generated. The
icon indicates that the buzzer is off
(silenced). After the buzzer is silenced, it does
not buzz when an alarm is generated.
indicates the number of active critical
alarms.
indicates the number of active major
alarms.
indicates the number of active major
alarms.
indicates the number of active
warnings.
-
You can tap
alarm bar to enter the active alarm screen
that displays all active alarms.
4 Power-On Commissioning
in the
98